Cost-effective solution for protecting outdoor Ethernet devices.

It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The N-SW is designed for outdoor deployment and supports up to 4 Gbps total, non-blocking line rate.
Features:
(1) Gigabit 24V Passive PoE In Port
(3) Gigabit 24V Passive PoE Out Ports
Outdoor, Weather-Resistant Enclosure
*PoE Injector Not Included

N-SW

The NanoSwitch (N-SW) is an outdoor, 4-port Gigabit switch with PoE pass-through.

NanoSwitch

Default

Each is outfitted with a hook that connects directly to the UISP cable drain wire.
Features:
<ul>
<li>Integrated, one-meter grounding wire*</li>
<li>Protects Ethernet hardware from ESD damage</li>
<li>Easy to install without soldering</li>
<li>(20) connectors per pack</li>
</ul>
*Connect to a tower grounding system or metal mounting bracket.

UISP-Connector-GND

Shielded RJ45 connectors designed for UISP Ethernet cables (UISP Cable Pro and Cable Carrier).

Surge Protection Connector GND

Outfitted with a hook that connects directly to the UISP cable drain wire.

UISP-Connector-SHD

Surge Protection Connector SHD

Introducing the next generation Ethernet Surge Protector, model ETH-SP-G2, from Ubiquiti. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP-G2 to the installation provides an additional layer of protection to the network. The ETH-SP-G2 is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.
Features:
<ul>
<li>Low-Cost Protection and Fast Installation</li>
<li>Protects Outdoor Ethernet Devices</li>
<li>Compatible with 10/100/1000 Mbps Networks</li>
</ul>

Datasheet

Quickstart Guide

ETH-SP-G2

ESD Protection for Outdoor High-Speed Networks

Ethernet Surge Protector

ESD protection for outdoor high-speed networks.

Overcome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. Features: 
<ul>
<li>Reliable Long-Distance Gigabit PoE Runs</li>
<li>Enhanced ESD Protection and EMI Reduction</li>
<li>Dependable 24V/50V Passive PoE Transport</li>
</ul>

F-POE-G2

The FiberPoE™ connects remote PoE devices and provides data and power using fiber and DC cabling.

Optical Data Transport for Outdoor PoE Devices

Connects remote PoE devices and provides data and power using fiber and DC cabling.

Mechanical
Dimensions	196 x 934 x 32 mm ( 7.73 x 3.68 x 1.28 ")
Weight	269 g (9.5 oz)
Enclosure Characteristics	White Polycarbonate
Hardware
On-Board Flash Storage	4Kbits
Total Non-Blocking Line Rate	4Gbps
TYP. Power Consumption	1.5W
Power Method	Passive 24V PoE-in
Supported Voltage Range	Passive 24V PoE-in
Networking Interfaces	(4) 10/100/1000 Mbps Ethernet RJ45
PoE Interfaces	Passive 24V PoE-in
Max PoE+ Wattage per Port by PSE	24V@1A per port / Total 24V@1.5A for three ports
Passive PoE Max wattage per port	24W per port / Total 36W for three ports
Operating Temperature	-30C ~ 70C
Operating Humidity	5 to 95% Non-Condensing