Entry-level access points for small venues.

Features:
Dual-band WiFi 6 support (2.4/5 GHz)
3.0 Gbps aggregate throughput rate
(1) GbE, PoE RJ45 Input

Installation Guide

U6-PLUS

A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses.

Access Point U6 Plus

Default

Features:
<ul>
<li>5 GHz WiFi 6 band, 2.4 GHz WiFi 4 band</li>
<li>1.5 Gbps aggregate throughput rate</li>
<li>Focused antenna pattern for optimal ceiling or wall mounting</li>
<li>(1) GbE RJ45 port (PoE In)</li>
<li>Fits UAP nanoHD covers and the recessed mounting bracket</li>
</ul>
Managed with UniFi Network application: Version 5.14.3 and later
Note. Due to chip supply shortages, each UniFi6 AP LED has been limited to white and blue indicators.

Datasheet

U6-Lite

Compact, dual-band WiFi 6 access point with multiple mounting options.

Access Point WiFi 6 Lite

U6 Lite

Access Point U6 Lite

The Access Point AC Lite (UAP AC Lite) is a high-performance, indoor, 802.11ac WiFi access point that utilizes Wave 2 technology to reach a 1.1+ Gbps aggregate throughput rate with its 5 and 2.4 GHz bands. The UAP AC Lite broadcasts its signal up to 122 meters (400 feet) away, allowing for greater multi-user support from further away. This access point can be powered with either PoE or 24V passive PoE*, and it is equipped with (1) GbE RJ45 port for high-speed LAN connectivity. The UAP AC Lite can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app.
Features:
<ul>
<li>802.11ac Wave 2 WiFi technology</li>
<li>5 GHz band with a 867 Mbps throughput rate</li>
<li>2.4 GHz band with a 300 Mbps throughput rate</li>
<li>Powered with PoE* or 24V passive PoE</li>
<li>(1) GbE RJ45 port</li>
</ul>
Managed with the UniFi Network application.
*5-packs do not come with PoE injectors.

UAP-AC-LITE

Single Unit

5-Pack

Indoor, dual-band, 802.11ac Wave 2 access point with a 1.1+ aggregate throughput rate.

Mechanical
Dimensions	Ø160 x 33 mm (Ø6.3 x 1.3")
Weight	Without mount: 338 g (0.75 lb) With mount: 413 g (0.91 lb)
Enclosure materials	Polycarbonate, aluminum
Mount materials	ABS, SGCC steel
Hardware
Networking interface	(1) GbE RJ45 port
Management interface	Ethernet
Power method	PoE
Supported voltage range	44–57V DC
Max. power consumption	9W
Max. TX power 2.4 GHz 5 GHz	23 dBm 23 dBm
MIMO 2.4 GHz 5 GHz	2 x 2 2 x 2
Throughput rate 2.4 GHz 5 GHz	573.5 Mbps 2402 Mbps
Antenna gain 2.4 GHz 5 GHz	3dBi 5.4 dBi
Button	Factory reset
LEDs	White/blue
Operating temperature	-30 to 60° C (-22 to 140° F)
Operating humidity	5 to 95% noncondensing
Certifications	CE, FCC, IC
Software
WiFi standards	802.11a/b/g WiFi 4/WiFi 5/WiFi 6
Wireless security	WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID	8 per radio
VLAN	802.1Q
Advanced QoS	Per-user rate limiting
Guest traffic isolation	Supported
Zero-wait DFS	Yes* *Supported with upcoming firmware versions.
Concurrent clients	300+
Software
Management application	UniFi Network: Version 7.3.76 and later