Simple power solutions for UniFi deployments.

Features:
<ul>
<li>Delivers up to 30W of PoE+</li>
<li>Compatible with the U6 LR, U6 Enterprise, and other PoE+ devices</li>
<li>Surge, peak pulse, and overcurrent protection</li>
<li>AC cable with earth ground</li>
<li>LED indicator for status monitoring</li>
</ul>

U-POE-at

An adapter that can power UniFi PoE+ devices with wireless mesh applications, or offload PoE switch power dependencies.

UniFi PoE+ Adapter

PoE+ Adapter

Default

Features:
<ul>
<li>Delivers up to 15W of PoE</li>
<li>Compatible with the U6 Mesh, Camera G4 Pro, and other PoE devices</li>
<li>Surge, peak pulse, and overcurrent protection</li>
<li>AC cable with earth ground</li>
<li>LED indicator for status monitoring</li>
</ul>

U-POE-AF

An adapter that can power UniFi PoE devices with wireless mesh applications, or offload PoE switch power dependencies.

PoE Adapter

UniFi PoE Adapter

Features:
<ul>
<li>Delivers up to 60W of PoE++</li>
<li>Compatible with the UA Hub, Camera G4 PTZ, and other PoE++ devices</li>
<li>Surge, peak pulse, and overcurrent protection</li>
<li>AC cable with earth ground</li>
<li>LED indicator for status monitoring</li>
</ul>

POE-50-60W

An adapter that can power UniFi PoE++ devices with wireless mesh applications, or offload PoE switch power dependencies.

UniFi PoE++ Adapter

PoE++ Adapter

Transforms a Protect WiFi Camera into a wired PoE camera.

UACC-Adapter-PoE-USBC

Transforms a Protect WiFi Camera into a wired PoE camera.

Protect WiFi Camera PoE Adapter

Introducing the next generation Ethernet Surge Protector, model ETH-SP-G2, from Ubiquiti. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP-G2 to the installation provides an additional layer of protection to the network. The ETH-SP-G2 is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.
Features:
<ul>
<li>Low-Cost Protection and Fast Installation</li>
<li>Protects Outdoor Ethernet Devices</li>
<li>Compatible with 10/100/1000 Mbps Networks</li>
</ul>

ETH-SP-G2

ESD Protection for Outdoor High-Speed Networks

Ethernet Surge Protector

ESD protection for outdoor high-speed networks.

The Long-Range Indoor/Outdoor Repeater (UACC LRE) is Gigabit adapter that allows you to easily and inexpensively expand your Ethernet network&#39;s range. With its (2) GbE RJ45 ports, the UACC LRE can receive PoE/PoE+ while providing passthrough PoE output. You can also chain multiple UACC LRE adapters together to connect access points and cameras that are far away from your PoE switch. The UACC LRE also offers 10kA+ surge protection and works reliably in extreme temperatures (-40 to 80° C) to protect your deployment from weather and electrical damage. Supports up to 1 km link distances*.
Features:
<ul>
<li>Establishes long-range connections between PoE switches and devices</li>
<li>Chains with other UACC LRE units</li>
<li>(1) GbE RJ45 port for PoE/PoE+ input</li>
<li>(1) GbE RJ45 port for passthrough PoE output</li>
<li>10kA+ surge protection</li>
<li>Works reliably in extreme temperatures (-40 to 80° C)</li>
</ul>
Note. The UACC-LRE is powered via PoE/PoE+ with pins 1,2+; 3,6- which may not be supported by certain third-party switches. We recommend using a UniFi switch to power the device.
*Deployment tested: (9) daisy-chained UACC LRE units connected to an endpoint device (e.g., camera, AP) using (10) 100 m UISP Cable Pros, all powered by UniFi PoE+ switch.

UACC-LRE

Long-range Gigabit Ethernet adapter that receives PoE/PoE+ and offers passthrough PoE output.

Long-Range Ethernet Repeater

Overcome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. Features: 
<ul>
<li>Reliable Long-Distance Gigabit PoE Runs</li>
<li>Enhanced ESD Protection and EMI Reduction</li>
<li>Dependable 24V/50V Passive PoE Transport</li>
</ul>

F-POE-G2

The FiberPoE™ connects remote PoE devices and provides data and power using fiber and DC cabling.

Optical Data Transport for Outdoor PoE Devices

Connects remote PoE devices and provides data and power using fiber and DC cabling.

Optical Data Transport

The 1 Gbps Multi-mode Optical Module is a duplex transceiver that delivers up to 1.25 Gbps speed over distances up to 550 meters.
Features:
<ul>
<li>1.25 Gbps throughput</li>
<li>Duplex LC connector</li>
<li>Supports connections up to 550 m</li>
<li>Supported media: MM Fiber (Fiber cable is not included)</li>
</ul>

UACC-OM-MM-1G-D-2

Pack Type

2-Pack

20-Pack

Multi-mode, duplex, fiber transceiver module.

1 Gbps Multi-Mode Optical Module

The Long-range Direct Attach Cable, 10 Gbps is an ultra-thin, lightweight, multi-mode fiber cable equipped (2) SFP+ optical transceivers capable of sustaining a 10 Gbps throughput rate. This cable is perfect for creating long-distance links between UniFi OS Consoles, switches, and other racked networking equipment.
Features:
<ul>
<li>Supported data rates: 10/1 Gbps</li>
<li>Multi-mode fiber cable</li>
<li>(2) SFP+ optical transceivers</li>
<li>Ultra-thin and lightweight</li>
</ul>

Specifications
Model	F-POE-G2
Dimensions	196.4 x 93.5 x 32.4 mm ( 7.73 x 3.68 x 1.28")
Weight	288 g (10.2 oz)
Enclosure	White Polycarbonate
Interface Connections	(1) 1 Gbps SFP Port (1) DC Terminal Block (1) DC RJ45 Port DC Injection (1) 1000 Mbps Ethernet PoE Port 10/100 Mbps Ethernet not supported
Typical Power Consumption	1.5W
Power Method	DC Terminal Block, 2-Wire, 24VDC or 50VDC DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) Passthrough PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) PoE Passthrough
PoE Output	PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or 4-Pair (24VDC or 50VDC) PoE
DC Output	Terminal Block, 2-Wire (24VDC or 50VDC)
Input DC Voltage	16 to 57V
Surge Protection	Built-In High-Current Gas Discharge Tube for DC Terminal Block and PoE Port
LED	White: Power On Blue: Connected Blue (Flashing): Activity
Operating Temperature	-40 to 60° C (-40 to 140° F) May be further restricted by the operating temperature range of the SFP module being used.
Operating Humidity	10 to 95% Noncondensing
ESD/EMP Protection	± 24kV Contact / Air for Ethernet
Certifications	CE, FCC, IC