UniFi
UISP
AmpliFi
airFiber 11 High-Band Backhaul Radio with Dish Antenna
$1,499.00
airFiber 11 Low-Band Backhaul Radio with Dish Antenna
AF11-Complete-LB
$1,499.00
Modular airFiber radio system built for the 11 GHz licensed frequency market that breaks free from the 5 GHz band.

Low-band point-to-point radio with dish antenna

11 GHz, 300+ km link range

1.2+ Gbps throughput

Distinct RX and TX frequencies

airFiber 11
$999.00
Sold Out
Technical Specifications
airFiber AF-11
Dimensions327 x 112 x 86 mm (12.9 x 4.4 x 3.4")
Weight2.3 kg (5 lb)
MountingAF-11G35 mount compatible
Hardware
Networking interface(1) GbE RJ45 port
(1) 10/100 MbE RJ45 port
Power methodPassive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Terminal block direct-wire
Power supply50V DC, 1.2A gigabit PoE adapter (Included)
Supported voltage range38-56V DC
Max. power consumption36W
RF connectors(4) SMA Weatherproof, Two per Chain: TX 0, RX 0 (Chain 0) and TX 1, RX 1 (Chain 1)
(2) N-Type Waterproof, One per Duplexer
Ambient operating temperature-40 to 55° C (-40 to 131° F)
CertificationsCE, FCC, IC
Software
ModesSISO/MIMO*
* Comes with (1) Low-Band Duplexer pre-installed for SISO mode. For MIMO mode, a second Duplexer is available, model AF-11-DUP-L.
System
Max. throughput1.2+ Gbps
Max. range300+ km
Encryption128-bit AES
RF
Operating frequency*10.7-11.7 GHz
*Depends on regional regulations.
Max. conducted TX power*30 dBm
*Depends on regional regulations.
Frequency accuracy± 1 ppm
Channel bandwidth*3.5/5/7/10/14/20/ 28/30/40/50/56 MHz selectable**
Programmable Uplink and Downlink duty cycles
* For region-specific details, refer to the Compliance chapter of the airFiber AF-11FX User Guide at ui.com/download/airfiber
**Channel widths may vary according to country/region regulations.
airFiber AF‑11G35
Dimensions811 x 811 x 460 mm (31.9 x 31.9 x 18.1")
WeightWithout mount: 7.14 kg (15.74 lb)
With mount: 11.85 kg (26.12 lb)
Wind loading1538 N @ 200 km/h (346 lbf @ 125 mph)
Wind survivability200 km/h (125 mph)
MountingPole mount
Frequency10.3 to 11.7 GHz
Gain35 dBi
HPOL beamwidth2.5°
VPOL beamwidth2.5°
Maximum VSWR2:1
PolarizationDefault: H/V
After rotating OMT: ± 45°
Cross-pol isolation35 dB
Pattern regulatoryETSI 302 217-4-2, Class 3, FCC Cat B