G2 Reader Pro
G2 Reader
Sold Out
Reader Lite
UA-Reader Lite
A convenient door access scanner supporting NFC reader and handwave door unlocking.

Unlock using an NFC card or UniFi Identity mobile app

Additional handwave unlock functionality

Connects to UniFi Access Hub using PoE

Installation Guide
Technical Specifications
Dimensions94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2")
Weight67 g (2.4 oz)
Enclosure materialPolycarbonate
Mounting optionsWall-mount, gang box mount*
*The UA-Reader Lite must be installed either indoors or under a roof eave outdoors.
Networking interface10/100 MbE
Max. power consumption6W
Power methodPoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range44–57V DC
Button(1) Factory reset
ConnectivityEthernet, BLE 4.1
NFC frequency13.56 MHz
NFC reading range<30 mm
NFC standardsISO 14443A, 14443B, 15693
NFC technologyNFC Tag 1, 2, 3, 4, 5
MIFARE Classic
MIFARE Ultralight
Operating environmentOutdoor use
Ambient operating temperature-20 to 40° C (-4 to 104° F)
Ambient operating humidity5 to 90% noncondensing
Software informationThe software version of a product can be checked at https://unifi.ui.com
UL 294 levelDestructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirementsCable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 GradeGrade assignment: I
CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision levelUA-Reader Lite, V02
SystemSteady blue: Adopted/device is ready
Steady white: Pending adoption
Blinking white/blue: Upgrading firmware
Management applicationUniFi Access: Version 1.5.9 and later