Pro 24 PoE
USW-Pro-24-POE (400W)
$699.00
A 24-port, Layer 3 switch capable of high-power PoE++ output.

(16) GbE PoE+, (8) GbE PoE++ ports

(2) 10G SFP+ ports

400W total PoE availability

DC power backup-ready

Layer 3 switching

Near-silent cooling

Pro 48 PoE
Additional (24) GbE PoE+ & (2) 10G SFP+ ports
$1,099.00
Installation Guide
Technical Specifications
Mechanical
Dimensions442 x 285 x 44 mm (17.4 x 11.2 x 1.7")
WeightWithout mounting brackets: 4.3 kg (9.5 lb)
With mounting brackets: 4.4 kg (9.7 lb)
Enclosure materialSGCC steel
Hardware
Management interfaceEthernet In-Band
Networking interface(24) GbE RJ45 ports
(2) 1/10G SFP+ ports
PoE interface(16) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Total non-blocking throughput44 Gbps
Switching capacity88 Gbps
Forwarding rate65.472 Mpps
Power method(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input, 52V DC, 7.69A; 11.5V DC, 2.61A
Power supplyAC/DC, internal, 450W
Supported voltage range100—240V AC
Max. power consumption50W (Excluding PoE output)
Total available PoE400W
Max. PoE wattage per port by PSE PoE+: 32W
PoE++: 64W
Voltage range PoE mode PoE: 44—57V
PoE+: 50—57V
ESD/EMP protectionAir: ± 16kV, contact: ± 12kV
LCM display (1) 1.3" touchscreen
ButtonFactory reset
Shock and vibrationETSI300-019-1.4 Standard
Ambient operating temperature-5 to 40° C (23 to 104° F)
Ambient operating humidity10 to 90% noncondensing
CertificationsCE, FCC, IC
Switching Features
Layer 2 featuresIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 featuresDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
LEDs
SystemStatus
EthernetPoE
Speed/link/activity
SFP+Link/activity
RPSStatus
Application Requirements
UniFi Network Version 5.10.5 and later