Visiting us from ?
SmartPower Strip
The SmartPower Strip is designed to monitor and manage multiple remote AC power connections and supports internet outage recovery.

Attempt to automatically recover from Internet outages*

(6) AC power outlets enabling remote monitoring and restarts

(4) USB-C ports supporting a total power budget of 20W

Integrated circuit breaker for current protection

Note. Requires a UniFi WiFi connection and a UniFi gateway.

*ISP modems and optical network terminals using a US AC plug are reset during an outage.

Installation Guide
Technical Specifications
Dimensions229.5 x 111.5 x 37.8 mm (9 x 4.4 x 1.5")
WeightWithout mount: 702 g (1.6 lb)
With wall mount: 849 g (1.9 lb)
Enclosure materialFire-retardant plastic
Mount materialFire-retardant plastic
MountingMagnetic wall mount (Included)
Management interface2.4 GHz WiFi
Networking interface802.11 b/g/n WiFi
Power methodAC input
Power supplyAC/DC embedded
Supported voltage rangeAC input/output: 125V~10A Max., 60 Hz
Max. power consumption1250W for 125V AC
Power output(6) Power control outlets,125V, 1250W Max. total
(4) USB Type C ports, 2A Max. per Port, 20W Max. total
Operating frequency2.4 GHz
Max. TX power16.9 dBm
MIMO1 x 1, 2 x 1
ESD/EMP protectionAir/contact: ± 24 kV
Buttons(1) Factory reset
(1) Circuit breaker
LEDs(1) Power: blue/white
Flashing white: bootup in progress
Flashing blue: firmware upgrading
Steady white: factory defaults, waiting adoption
Steady blue: device is adopted
Ambient operating temperature0 to 40° C (32 to 104° F)
Ambient operating humidity10 to 90% noncondensing
CertificationsFCC, IC
WiFi standards802.11 b/g/n
Power saveYes
Wireless securityWPA2-PSK AES/TKIP
Supported Data Rates (Mbps)
802.11b1, 2, 5.5, 11 Mbps
802.11g6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n6.5 - 72.2 Mbps (MCS0 - MCS7, HT 20)