UniFi
UISP
AmpliFi
Wave Pico
Wave-Pico
$179.00
Sold Out
Lightweight, compact 60 GHz PtMP station powered by Wave Technology.

Max. link range:
— Wave AP: 1.3 km
— Wave AP Micro: 0.9 km

Max. throughput: 2 Gbps (1 Gbps duplex)

5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)

(1) GbE RJ45 port

Integrated Bluetooth

To subscribe to back in stock e‑mails.
UISP Dual-Power Injector
$79.00
Installation Guide
Technical Specifications
Mechanical
DimensionsØ152.1 x 55.8 mm (Ø6 x 2.2")
WeightWithout mount: 347 g (12.2 oz)
With mount: 409 g (14.4 oz)
Enclosure materialUV stabilized polycarbonate
Mount materialUV stabilized polycarbonate
Pole mount diameter20 to 53.1 mm (0.8 to 2.1") on pipe outer diameter
Wind loading31.3 N at 200 km/h (7 lbf at 125 mph)
WeatherproofingIPX6
Hardware
ProcessorDual-core ARM® Cortex®-A53 at 1 GHz
MemoryDDR3L 512 MB
Networking interface(1) GbE RJ45 port
Max. power consumption10W
Power methodPassive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8 -)
Passive PoE 2-pairs (4, 5+; 7, 8 -), for 44–54V DC only
Power supply48V DC, 0.5A gigabit PoE adapter (Included)
Can be powered by a UISP Router or UISP Switch
Supported voltage range44–54V DC
22–27V DC
GPSNo
ButtonFactory reset
LEDsPower, Ethernet, link
Ambient operating temperature-40 to 60° C (-40 to 140° F)
Ambient operating humidity5 to 95% noncondensing
CertificationsFCC, IC, CE
Software
Operating modePtMP station, PtP
Ubiquiti specific featuresWave AI, discovery protocol
ServicesUISP, ping watchdog, NTP client, SNMP
ToolsAntenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey*
*FW version 3.3.0 and later.
NetworkBridge/Router* mode
*Router is available in PtMP station mode only.
Application requirementsUISP web: Version 2.4.61 and later
UISP mobile iOS™: Version 2.32.0 and later
UISP mobile Android™: Version 2.31.9 and later
System
Total throughput2 Gbps (1 Gbps duplex)
Max. rangeUp to 1.3 km (Wave AP)
Up to 0.9 km (Wave AP Micro)
EncryptionWPA2-PSK (AES)
RF
Operating frequency*57–71 GHz
*Depends on regulatory region.
Channel bandwidth2160, 1080, 540* MHz
*FW version 3.3.0 and later.
Operating channels*58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz
*Depends on regulatory region.
Modulation16QAM, QPSK
Antenna gain27.7 dBi
PolarizationVertically linear
BeamwidthAzimuth: 3 dB 6°
Elevation: 3 dB 6°
Back-Up RF
WiFi standard802.11ax (WiFi 6)
Operating frequency*
US/CA




Worldwide

U-NII-1 5150 - 5250 MHz
U-NII-2A 5250 - 5350 MHz
U-NII-2C 5470 - 5725 MHz
U-NII-3 5725 - 5850 MHz

5180 - 5875 MHz
*Depends on regulatory region.
Channel bandwidth20, 40, 80 MHz
ModulationBPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain9 dBi
PolarizationDual-linear
BeamwidthAzimuth: 3 dB 50°
Elevation: 3 dB 50°
Cross-pol isolation15 dB
LEDs
PowerFlashing white: bootup in progress
White: not connected to UISP application
Blue: connected to UISP application
Flashing blue: locate in progress
Blue/white: firmware upgrade in progress
EthernetFlashing blue: Ethernet traffic detected
LinksWhite: 5 GHz link
Blue: 60 GHz link