Wave AP
Wave-AP
$499.00
60 GHz PtMP access point powered by Wave Technology.

Max. throughput: 5.4 Gbps (2.7 Gbps duplex)

30° sector coverage

5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)

(1) 2.5 GbE and (1) 10G SFP+ WAN ports

24* client capacity:
— Wave Pro (8 km link range)
— Wave Long-Range (8 km link range)
— Wave Nano (5 km link range)
— Wave Pico (1.3 km link range)

Integrated GPS & Bluetooth

*FW version 3.3.0 and later.

Installation Guide
Technical Specifications
Mechanical
Dimensions212 x 205 x 187 mm (8.3 x 8.1 x 7.4")
Weight2.3 kg (5.1 lb)
Enclosure materialAluminum alloy, UV stabilized polycarbonate
Pole mount diameter25 to 76 mm (1 to 3") on pipe outer diameter
Wind loading98 N at 200 km/h (22 lbf at 125 mph)
WeatherproofingIPX6
Hardware
ProcessorQuad-core ARM® Cortex®-A53 at 1.4 GHz
MemoryDDR3L 512 MB
Networking interface(1) 2.5GbE RJ45 port (100/1000/2500)*
(1) 10G SFP+ port (1/10)
* Active only when SFP+ port is down.
Max. power consumption24W
Power methodPassive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply48V DC, 0.65A 2.5GbE PoE adapter (Included)
Supported voltage range44–54V DC
22–27V DC
GPSYes
ButtonFactory reset
LEDsPower, Ethernet, GPS
Ambient operating temperature-40 to 60° C (-40 to 140° F)
Ambient operating humidity5 to 95% noncondensing
CertificationsFCC, IC, CE
Software
Operating modePtMP access point
Ubiquiti specific featuresWave technology
ServicesUISP, ping watchdog, NTP client, SNMP
ToolsAntenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey*
*FW version 3.3.0 and later.
NetworkBridge mode
Application requirementsUISP: Version 1.5.7 and later
System
Total throughput5.4 Gbps (2.7 Gbps duplex)
Supported clients count24*
*FW version 3.3.0 and later.
Max. rangeConnecting to a Wave Pro: up to 8 km
Connecting to a Wave Long-Range: up to 8 km
Connecting to a Wave Nano: up to 5 km
Connecting to a Wave Pico: up to 1.3 km
EncryptionWPA2-PSK (AES)
RF
Operating frequency*57–71 GHz
*Depends on regulatory region.
Channel bandwidth2160, 1080, 540* MHz
*FW version 3.3.0 and later.
Operating channels*58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz
*Depends on regulatory region.
Modulation16QAM, QPSK
Antenna gain24 dBi
PolarizationVertically linear
BeamwidthAzimuth: 3 dB 30°
Elevation: 3 dB 3°
Electrical downtilt
Back-Up RF
WiFi standard802.11ax (WiFi 6)
Operating frequency*
US/CA




Worldwide

U-NII-1 5150 - 5250 MHz
U-NII-2A 5250 - 5350 MHz
U-NII-2C 5470 - 5725 MHz
U-NII-3 5725 - 5850 MHz

5150 - 5875 MHz
*Depends on regulatory region.
Channel bandwidth20, 40, 80 MHz
ModulationBPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain12 dBi
Cross-pol isolation10 dB
PolarizationDual-linear
BeamwidthAzimuth: 3 dB 35°
Elevation: 3 dB 60°
Electric downtilt
LEDs
PowerFlashing white: bootup in progress
White: not connected to UISP application
Blue: connected to UISP application
Flashing blue: locate in progress
Blue/white: firmware upgrade in progress
EthernetFlashing white: Ethernet traffic detected
Flashing blue: SFP+ traffic detected
GPSBlue: receiving at least (4) GPS satellite signal